NINGBO MELONTEL COMMUNICATION EQUIPMENT Co.,Ltd
NINGBO MELONTEL COMMUNICATION EQUIPMENT Co.,Ltd
Add to Cart
Basic Information
An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air). The word was coined by William Whewell at the request of the scientist Michael Faraday from two Greek words: elektron, meaning amber (from which the word electricity is derived), and hodos, a way.
| Name : | Fiber optic electrode |
| Application: | For Fiber optic |
| Country of origin : | Ningbo,China |
| Suitable : | S175/ S176/ S177/ S177A/ S960 |
| Color : | Black and silver |
| Packing : | 1 pair /box |
1First, you must confirm that the fusion splicer is in the off state, remove the protective cover of the electrode compartment, and loosen it.
Remove the upper electrode from the screw of the electrode; then loosen the top wire of the lower electrode and remove the lower electrode.
2 Secondly, install a new electrode. The operation steps are the opposite of the method of disassembling the electrode. want
Find the gap between the two electrode tips: 2.6 plus or minus 0.2 mm.
3 Finally, during the assembly process, the tip of the electrode should not be touched to prevent damage to the electrode and avoid the electrode
Dropped inside the machine and caused damage. After the electrode is replaced, the arc position should be calibrated.