NINGBO MELONTEL COMMUNICATION EQUIPMENT Co.,Ltd
NINGBO MELONTEL COMMUNICATION EQUIPMENT Co.,Ltd
Add to Cart
| Name : | Fiber optic electrode |
| Application: | For Fiber optic |
| Country of origin : | Ningbo,China |
| Suitable : | S123C-A S123M4 |
| Color : | Black and silver |
| Packing : | 1 pair /box |
Fujikura Spare Electrodes:
Fitel Spare Electrodes
• S960 -electrodes for Fitel S147, S175, S182A,S182K, S176, S177, S198A fusion splicers
• S969 -electrodes for S178A,Fitel S123C, S153A Fusion Splicer
• S963 -Electrodes for Fitel S121A Fusion Splicer
•S966 -Electrodes for Fitel S122A Fusion Splicer
• S962 -Electrodes for Fitel S175K,S182K,S182PM Fusion Splicer
Sumitomo Spare Electrodes
• ER-10 -Electrodes for Sumitomo Type-39 Fusion Splicer
• ER-6 -Electrodes Sumitomo Type-35,Type-36 Fusion Splicer
• ER-8 -Electrodes Sumitomo Type-37 Fusion Splicer
• ER-7 - Electrodes for Sumitomo Type-65 Fusion Splicer
• ER-9 - Electrodes for Sumitomo Type-25 Fusion Splicer
• ER-5 - Electrodes for Sumitomo Type-61, 62, 63, 41S Fusion Splicer
Other Spare Electrodes
• SE-300 -Electrodes forJilong KL-260C,280, 300 Fusion Splicer
• SE-260 -Electrodes for Jilong KL-260A,260B Fusion Splicer
• SE-41 -Electrodes for CE41AV6471 Fusion Splicer
1 First, you must confirm that the fusion splicer is in the off state, remove the protective cover of the electrode compartment, and loosen it.
Remove the upper electrode from the screw of the electrode; then loosen the top wire of the lower electrode and remove the lower electrode.
2 Secondly, install a new electrode. The operation steps are the opposite of the method of disassembling the electrode. want
Find the gap between the two electrode tips: 2.6 plus or minus 0.2 mm.
3 Finally, during the assembly process, the tip of the electrode should not be touched to prevent damage to the electrode and avoid the electrode
Dropped inside the machine and caused damage. After the electrode is replaced, the arc position should be calibrated.